Performance Tool Replacement Blades for Safety Scraper 5-Pk., Model# W229

$3.99

3 1/2in. replacement blades removing wall paper, vinyl and resilient tile. Fits Safety Scraper, Item# 9094248.

Store: Northern Tool

T & E Tools Torque Multiplier 1000 Ft.-Lbs., Model# TE5073

$329.99

A torque multiplier considerably increases torque output. Includes blow-molded carry case. 1/2in. female input x 3/4in. male output 14in. bar 1000 ft.-lbs.

Store: Northern Tool

Tool Aid GM TBI Fuel Injection Pressure Tester Adapter

$39.67

This adapter is for use with Cat. Nos. 33770, 33900, 33950, 33980, 36100, 36150, 36200, 36250, 37450 and 37600. GM Inline Adapter - Replaces fuel filter with threads on both ends for Throttle Body Injection.

Store: ShoppersChoice.com

Tool Aid Electronic Fuel Injection And Ignition Spark Tester Kit

$27.39

Quickly diagnose no start and engine miss conditions in the electrical fuel injection and spark plug circuits. Analyze rough running engines. Contains a noid light set to test electronic fuel injection signals and a in-line ignition spark checker shows a duplicate view of ignition spark. Supplied with instructions in a durable, plastic molded storage case. Noid light are supplied to check: Bosch PFI, Ford TBI, Geo TBI, GM PFI, GM SCPI, GM TBI

Store: ShoppersChoice.com

Klein Tools Erection Wrench, 1in. Bolt, for U.S. Heavy Nut, Model# 3214

$59.99

The Klein Tools Erection Wrench is an ideal tool when working with steel framing construction. This heavy-duty wrench is designed to work with 1in. U.S. heavy nuts. U.S.A. 1in. bolt size 3 5/8in. head width; nominal opening is 1 5/8in. 18in.L; tapers from 1 1/8in. to 1/4in. Forged from select alloy steel to withstand high-leverage and heavy loads Extra-heavy-duty head area gives maximum strength and durability Continuous taper of handle makes lining-up bolt holes easy and works on a range of bolt and/or hole sizes without binding Extra-large hub area works on larger diameter holes than other wrenches Catalog number, bolt size and nominal opening size are stamped on every wrench for easy identification American Bridge design

Store: Northern Tool

Northern Industrial 10in. Wheel Balance Weight Tool, Model# H01-017-0079

$9.99

Drop-forged steel with chrome plate finish. Nonslip PVC-dipped handles for comfort and extra grip. Pieces (qty.): 1, Tool Length (in.): 10, Material Type: Drop-Forged Steel with Chrome Plate Finish, Handle Type: Nonslip PVC-Dipped Handles

Store: Northern Tool

Klein Tools End-Cutting Pliers 8in.L, Model# D232-8

$54.99

Klein Tools end-cutting pliers offer wide throat clearance for clean, even cutting of wire or nails at close range. U.S.A. Pieces (qty.): 1, Tool Length (in.): 8, Handle Type: Extended 3/8in. jaw length; 19/32in. jaw thickness Large 1 3/16in. jaw width Wide throat clearance for clean, even cutting of wire or nails at close range High-leverage design provides greater cutting power at the knives than other plier designs Extended handles for longer reach and increased leverage

Store: Northern Tool

Klein Tools Broad Head Bull Pin 13in. x 1 1/4in. Top Dia., 5/16in. Point Dia., Model# 3255

$19.99

The Klein Tools 1-1/4in. broad head bull pin is ideal for aligning bolt holes when working with steel construction. The corrosion resistant black finish prevents rusting and the heat treated quality steel alloy material assures a strong and durable tool. While the standard design costs less then the Broad head design resists mushrooming, providing longer tool life than found with conventional bull pin designs. U.S.A. Forged, heat-treated increases efficiency by providing a larger striking surface to hit Broad head design also reduces the chance of the pin slipping from the hand while aligning holes Angled head and smooth blending of radii helps increase the strength and reduces the danger of chipping during use Squared-off shoulders, just below the head are forged to provide a surface for applying a wrench to loosen wedged bull pins after alignment Long, even tapered lay of pin reduces binding and hang-up while driving Added resistance to &Quot;mushrooming&Quot; ensures longer tool life not found with conventional designs Heat-treated for added strength Black finish provides rust and corrosion resistance ensuring tool longevity

Store: Northern Tool

Performance Tool Tamper-Resistant Star Bits 8-Pc. Set, Model# W1386

$9.99

For use on tamper-resistant Star fasteners commonly found on radio mountings, exterior mirrors, carburetors and other applications. Bits constructed of heat-treated alloy steel. Sizes: T-10, T-15, T-20, T-25, T-27 T-30 & T-40 1/4in. hex to 1/4in. square drive adapter

Store: Northern Tool

Klein Tools Adjustable Head Construction Wrench, Model# 3239

$74.99

The Klein Tools adjustable head construction wrench is an ideal addition to your tool arsenal. The adjustable jaws adjust out to a maximum capacity of 1 1/2in. and the continuous-taper handle assists in the aligning of bolt holes. U.S.A. 16in.L Versatile wrench fits all nuts and bolts to 1-1/2in. Eliminates the need for carrying several fixed-size wrenches Forged from select alloy steel with continuous-taper handle for aligning bolt and/or rivet holes Industrial black finish for corrosion resistance

Store: Northern Tool

Strong Hand Tools Ratchet Action Utility Clamp 7in., Model# UF65R

$43.99

Strong Hand Tools ratchet action utility clamp provides a unique ratcheting action sliding arm clamp with removable/reversible clamp arm and threaded jaw hole for addition of extender block and V-pad accessories. Unique ratcheting action sliding arm clamp Removable/reversible clamp arm Threaded jaw hole for addition of extender block and V-pad accessories Designed for quick setup, easy operation and high-pressure clamping Pivoting 1 1/2in. contact plate Rapid release button Threaded 3/8-16 hole in top and bottom for adding accessories Heat-treated steel with nickel/chrome plating for strength and durability Throat size 4 3/4in. Rail size 7/8in. x 7/16in. Clamping pressure 1000 lbs.

Store: Northern Tool

Klein Tools Ironworkers Side-Cutting Pliers 8 3/4in., Model# D201-7CST

$42.99

Klein Tools 8 3/4in. ironworkers side-cutting pliers twist and cut soft annealed rebar tie wire. U.S.A. Tool Length (in.): 8 3/4, Handle Type: Hook bend Twist and cut soft annealed rebar tie wire Hook bend handle Spring-loaded action Heavy duty knurled jaws

Store: Northern Tool

Irwin PTS Drive Tool 7-Pc. Set, Model# 4935055

$79.99

The Irwin Performance Threading System (PTS) die-lock design eliminates set-screws simply twist to insert and remove die. Ergonomic handles on the drive tool offer more control and comfort when threading. Pieces (qty.): 7 Versatile tap socket base allows you to drive with die stock, 3/8in. ratchet or T-handle (included) Adjustable tap socket accommodates standard 1in. hex dies and ANSI spec taps Adjustable tap socket jaws fit taps from No. 4 to 1/2in. or 3mm to 12mm Includes SAE and metric pitch gauge

Store: Northern Tool

Performance Tool Professional Tube Cutter, Model# W82003

$8.99

Use to cut tubing made of hard and soft copper, aluminum, brass, thin wall steel and stainless steel lines. Carbide steel wheel cuts to within 1/4in. from end of tube, and pivoting reamer blade cleans tube ends then swings out of the way when not in use. Highly polished and chrome plated for corrosion resistance. Tube cutting range: 1/8in. to 1 1/8in. (4 to 28mm) Wide rollers prevent spiral cut Extra-high carbon cutting blade included and stores under reamer

Store: Northern Tool

Thorsen Tools Dog Bone Wrench SAE, Model# 22-400

$17.99

This handy Thorsen Tools SAE dog bone wrench covers 8 popular SAE sizes. Head swivels to meet all angles. Perfect for drain plugs, as it features a strong magnet to hold plug.

Store: Northern Tool

Klein Tools Crimping/Cutting Tool Model# 1005

$32.99

Klein Tools crimping/cutting tool accommodates wire from #10 to 22 AWG. U.S.A. Handle Type: Plastic dipped cushioned Handles wire from #10 to 22 AWG Tapered nose design for working in confined spaces Hardened wire cutter in nose Crimping die marked for insulated and non-insulated solderless terminals and connectors Plastic-dipped cushioned handles Hot-riveted joint for smooth action and no handle wobble

Store: Northern Tool

Strong Hand Tools Multi-Axis Welders Angle Clamp XL 2 Axis, Model# WAC45

$124.99

Save time and money with the quick-acting Strong Hand line of Clamps, Magnets, and Pliers. Each innovative Strong Hand Clamp is specifically designed to be quick-acting, so you save valuable work set-up time. Built with heat-treated steel and nickel/chrome plating for strength and durability. Features exclusive Quick Acting Button Press and hold button and threaded spindle slides in and out for fast setup Release button and threads re-engage for tightening Accurate 90 angle Easy adjustments hold workpieces of differing thickness Stand-off increases access 4 3/4in. miter joints 5 5/16in. jaw length 2 1/2in. jaw height 3 7/8in. T-clearance

Store: Northern Tool

Performance Tool Heavy-Duty Nut Splitter, Model# W88030

$12.99

Rusted, stripped and down-right stubborn nuts can be a chore to remove. But not when you use this heavy-duty nut splitter, with its self-centering wobble tip and offset design for easier operation. Constructed of drop-forged steel and plated to resist corrosion. Chisel is heat treated. Splits nuts 7/16in. to 3/4in.

Store: Northern Tool

Bullet Tools Replacement Blade for PRO Magnum Shear 20in., Model 920B

$199.99

Bullet Tools high-performance Premium Blade is specifically designed for the PRO Magnum Shear I-20, Item# 253284. U.S.A. Blade Size (in.): 20 x 1 5/8, Material: Steel Cuts 1in./24mm laminate

Store: Northern Tool

Performance Tool 12-Pt. Bits (Triple Square) 4-Pc. Metric Set, Model# W1395

$3.99

Each bit has a 1/2in. hex drive shaft and is constructed of heat-treated alloy steel. Sizes: 6, 8, 10 and 12 mm

Store: Northern Tool

T&E Tools Snap Ring Pliers 10-Pc. Set

$29.99

T&E Tools 10-Pc. Snap Ring Pliers Set operate both internal and external rings. Includes 4 bent and 4 straight pliers of heat-treated steel, sizes 5 1/2 in. to 9 in. One 5 in. hook and 5 in. pick. Impact-resistant carrying case. Pieces (qty.): 11, Internal / External: Internal / External, Tool Length (in.): 5 1/2 to 9, Tip Type: 4 Bent, 4 Straight, 1 Hook, 1 Pick, Material Type: Heat-Treated Steel

Store: Northern Tool

Klein Tools Slotted Screwdriver 4in. Shank, 1/4in. Tip, Model# 600-4

$10.99

Klein Tools 4in. slotted screwdriver tools feature keystone tip with Tip-Ident which quickly identifies the type of screwdriver and screwdriver tip orientation. U.S.A. Tool Length (in.): 4, Material Type: Chrome plated Heavy-duty square shank screwdriver 4in.L square shank for wrench-assisted turning Precision-machined 1/4in. keystone tip Chrome plating for corrosion resistance Cushion-grip handle for greater torque and comfort Meets or exceeds ASME/ANSI specs Bolster reinforces shank for hard use

Store: Northern Tool

Murray Tools Tri-Gage Combo Tool Metric Sizes

$19.99

This time-saving tool is a combination bolt sizer, thread pitch gauge and bolt grade chart, as well as a complement to the Murray Tools Thread Repair System. The Tri-Gage tool accurately identifies bolt diameter, thread pitch and hardness, indicates wrench size for proper installation and selects correct size thread repair die to chase your threads clean. U.S.A. Metric Set: Yes, Material Type: Stainless steel Metric sizes: 524mm bolt diameters Made of high-grade stainless steel for corrosion-resistant durability

Store: Northern Tool

Klein Tools End-Cutting Pliers 2000 Series, 8in., Model# D2000-32

$49.99

Heavy-duty Klein Tools 2000 Series end-cutting 8in. pliers have wide throat for clean, even cutting of wires or nails. U.S.A. Tool Length (in.): 8, Material Type: Polished and black oxide finish, Handle Type: Extended handles Wide throat for clean, even cutting of wires or nails High-leverage design for greater cutting power 2000 Series heavy-duty cutting knives cut ACSR, screws, nails and most hardened wire

Store: Northern Tool

K-D Tools Harmonic Balancer Puller

$24.79

Puller removes balancers, pulleys and gears with taped holes. A floating swivel prevents damage to the shaft end. Four slots in the yoke allow for 2- or 3-hole applications. Tool bolts to balancer with center screw on the end of the crankshaft. Tighten while tapping on the screw head to remove balancer. Puller includes 3/8-24 UNF, 5/16-18 UNC, 3/8-16 UNC and 10mm x 1. 5 screws for most American and imported cars. Replacement Part: 2286-75 Yoke and Screw Swivel Replacement Part: 2286-76 Center Screw Replacement Part: 2286-77 Screw Assortment

Store: ShoppersChoice.com

K-D Tools Drum Brake Resetting Tool

$49.33

This quality tool is used to set the proper clearance between brake lining and drum prior to assembly. Inside calipers measure drum diameters and outside calipers transfer measurement to brake shoes. Knurled know locks tool at measurement. Working drum diameter range: 6-1/2 inch to 14-1/4 inch. Calibrated in 1/32 inch (1mm) increments

Store: ShoppersChoice.com

K-D Tools Digital Brake Rotor Gauge

$116.17

Measures brake Rotors and ball joints. 6 inch 150MM length, 3-1/2 throat depth. Range: 0005 inch /. 01mm.

Store: ShoppersChoice.com

Central Tools / Central Lighting Brake Rotor/Ball Joint Gage Set

$234.45

Check ball joint wear and brake rotor run-out Also check: gear backlash, valve guide wear, camshaft wear With optional attachments check tire and wheel run-out Special locking pliers clamp securely to any convenient object Eliminates vibration problems and false readings by mounting directly on spindle Includes: Dial indicator (Central4344), locking pliers, infinitely adjustable flexarm, and fitted case. Dial Indicator Specifications: Range: 1 inch Graduations: 0. 001 inch Reading: 0-100

Store: ShoppersChoice.com

K-D Tools Drum Brake Adjusting Tool

$14.76

Tool adjusts clearance between drum brake and brake shoe. It fits through a slot in the backing plate and turns the star wheel. Ends of tool are offset for hard-to-reach areas on small cars.

Store: ShoppersChoice.com

K-D Tools Drum Brake Adjusting Tool

$11.77

Tool adjusts clearance between drum brake and brake shoe. It fits through a slot in the backing plate and turns the star wheel in many drum brakes.

Store: ShoppersChoice.com

K-D Tools Pitman Arm Puller

$29.84

Puller removes full-size Pitman arms. To use, mount jaws over Pitman arm and turn center screw with wrench until tight. Strike center screw with hammer to release Pitman arm. No other tools are needed. Puller has a drop-forged and heat-treated steel yoke. Screw size 5/8 inch-18 thread.

Store: ShoppersChoice.com

K-D Tools Pulley Puller And Installer Set

$62.75

Remove pressed-on alternator and power steering pulleys on late-model GM, Ford and Chrysler engines. The threaded end installs late-model GM alternator and power steering pulleys, including Quad 4. Reverse the jaws to pull the alternator internal bearing. The puller fits some AMC s. Will not work on 3. 3L and 3. 5L Chrysler engines. Includes: Puller Body, Jaw and Sleeve Assembly, Jackscrew, Button, Bearing and Washer, Puller Pin for Quad 4, Screw Installer for Quad 4, Puller Pin for GM 3. 1, Screw Installer for Ford 4. 6 and Screw Installer for All Others.

Store: ShoppersChoice.com